Procedure for Upgrade to "Test" version:

1.) MUST Download the LATEST Flash Wizard 3.x software( ftp://ftp.multitech.com/utilities/flashwizard/3000/FlashWizard3000.exe )
2.) Install Flash Wizard 3.x
3.) Download MT200A2W_p106c.ZIP from ftp site. ( ftp://ftp.multitech.com/wireless/mt200a2w/MT200A2W_p106c.zip )
4.) Unzip and place the KKQGp06c.HEX file into the Flash Wizard Installation directory( i.e. C:\Program Files\Multitech\FlashWizard).
5.) Start Hyperterminal or Comm Terminal application.
6.) Configure the MT200A2W for "Firmware Upgrade" procedure.
7.) Close the Terminal application.
8.) Start Flash Wizard and wait until it finds the MT200A2W and select the appropriate comm port.
9.) Select the ".P06C" version and begin the upgrade.
10.) When the utility completes - It MUST indicate "Upgrade Successful"

Now, go to the terminal application to verify the storing of parameters and notify MTS of any discrepancy!  
